OB6728x BLDC PMSM FOC Motor Driver IC | Highly Integrated Single-Chip Motor Controller
2026.11.18
13 次
OB6728x highly integrated BLDC PMSM FOC motor driver IC, single-chip 3-phase brushless motor controller for vacuum cleaners, power tools and pumps

Troubles with three-phase BLDC / PMSM motor drive development? Discrete design & bloated BOM: MCU, gate driver, regulator, op-amp and comparator built separately, with numerous peripheral components and large PCB footprint. Long development cycles: Complex co-debugging of motor algorithms, PWM, sampling and protection modules slows down your new product launch. Reliability risks: Shoot-through, overcurrent, overtemperature and undervoltage hazards are interlinked; inadequate protection may lead to burnt boards and damaged MOSFETs. High cost pressure: Home appliances, power tools, pumps and fans are highly cost-sensitive, requiring tight cost control for every peripheral component.

The OB6728x offers a smarter solution: it integrates MCU, three-phase full-bridge driver and high-precision power supply into a single chip, enabling a complete Field-Oriented Control (FOC) circuit with minimal external components.


The OB6728x is a highly integrated, high-performance, cost-effective three-phase BLDC / PMSM motor controller IC. It integrates a 32-bit ARM Cortex‑M0 MCU, three-phase full-bridge driver and high-precision 5V LDO on-chip. It supports sensorless and sensored FOC control for three-phase PMSM, ideal for vacuum cleaners, power tools, pumps, compressors, blowers and other motor drive applications.


Key Features


01 Highly Integrated Single-Chip Solution, Reduced Peripherals & PCB Footprint


  • On-chip Cortex‑M0 MCU + three-phase full-bridge driver + 5V LDO;

  • Integrated Programmable Gain Amplifier (PGA) and multiple analog comparators, paired with multi-channel high-speed ADC to support high-performance motor control algorithm development;

  • Selected models come with embedded bootstrap diodes and current-limiting resistors to further cut BOM count;

  • Available in QFN32 and QFN40 packages to fit varied PCB space and drive power requirements.


02 72MHz Motor Control MCU with Abundant Algorithm & Sampling Resources


Item

Specification

Core

ARM Cortex‑M0, 72MHz, built-in NVIC

Operating Voltage

1.8V – 5.5V

Memory

32KB Flash,8KB SRAM

Timers

1 × 32-bit + 2 × 16-bit timers / counters

PWM

6-channel 16-bit PWM

ADC

13-channel 12-bit ADC

Analog Modules

1 × 8MHz, 10V/μs PGA; BEMF detection comparator + current protection comparator + general-purpose comparator

Algorithm Acceleration

CORDIC, Multiplication & Division Unit (MDU)

Reliability

CRC check, Watchdog Timer (WDT)

Communication & Debug

UART, SPI, I2C; SWD on-chip debug


03 Robust Drive Capability, Wide Voltage Rating: 70V / 200V Options


  • 3 high-side bootstrap drivers + 3 low-side drivers, push-pull structure with low on-resistance for fast turn-on / turn-off of external MOSFETs;

  • VB voltage rating: 70V (S series) / 200V (H series), compatible with multiple bus voltage platforms;

  • Comprehensive drive current ratings (source / sink) for low-to-medium power motor applications;

  • Matched delay for same-bridge drivers, with built-in dead time and shoot-through prevention logic.


04 Dual Current Protection & Full-Spectrum Protection System


  • Software-configurable current protection comparator inside the MCU;

  • Hardware current protection comparator integrated in the full-bridge driver, threshold set by external circuit to shut down the driver directly; soft MOSFET turn-off reduces voltage spikes;

  • Multi-layer protection: IC supply undervoltage / overvoltage lockout, high-side driver supply undervoltage protection, overtemperature protection, shoot-through lockout, motor short-circuit protection;

  • The embedded LDO features short-circuit and overtemperature protection, 5V ±2% output accuracy, max output current up to 80mA (100mA for FPP variants).


05Flexible Selection by Voltage Rating & Package


Part Number

Package

VB Rating

Drive Current

Bootstrap Diode

OB6728SFPP 

SFPPA

QFN40

70V

0.25A / 1.2A

Integrated

OB6728SFXP SFXPA

QFN32

70V

0.25A / 1.2A

Integrated

OB6728FPP

FPPA

QFN40

70V

0.5A / 1.1A

Integrated

OB6728HFXP HFXPA

QFN32

200V

0.5A / 1.1A

Integrated

Thermal resistance (RθJA): QFN40 = 72.4℃/W; QFN32 = 62.4℃/W. Refer to the official datasheet for complete electrical characteristics.


Typical Applications


Supporting sensorless & sensored FOC for three-phase PMSM, the OB6728x serves these end markets:

  • Cleaning appliances: Cordless vacuum cleaners, handheld vacuums

  • Power tools: Brushless drills, impact wrenches, angle grinders

  • Fluid transfer: Water pumps, oil pumps

  • Refrigeration & compression: Compressors

  • Ventilation & cooling: Fans, blowers, cooling fans